Brewer Lecture Hall
                              BCHS 100 A/V Operation Guide

1.         Touch the Remote Control screen to take display out of screen-saver 
            mode.

2.         If the Main Page is not displayed, touch the MAIN PAGE icon.

3.         Touch the SYSTEM ON Icon.

4.         Insert media into appropriate source(s).  (VCR, Laser Disc, Slide, etc.)

5.         At the Remote Control, touch the icon VIDEO SOURCES

6.         Touch the appropriate Icon for the source desired.  
            VHS PLAYER    LASER PLAYER     COMPUTER   

            This is also where you turn the PROJECTOR ON or PROJECTOR 
            OFF  

7.         Touch the PLAY icon for VHS or Laser Disk.  
            All associated controls to the deck will be available at this time.

8.         Adjust the volume with the volume +     -   icons.

9.         After completion of a VCR tape, press the STOP icon and then the 
            <<  (rewind) icon.

10.       You may select another media source at this time. (return to step 5)

11.       Remove the media from the machine.

12.       At the VIDEO SOURCE, touch the PROJECTOR OFF icon.  

13.       At the Main Page turn the SYSTEM OFF.              

NOTE: Do not attempt to control the projector or media sources directly from the unit.  This may cause a system “Lock Up” condition.   Problems?  Contact Lora Rettig (x5968), the TSS (x-4357) or the Lab Intern (x4021).